Spectrum Analyzer ( AT 5000 Series)

Model: AT 5011 with tracking generator 

AT5000 series spectrum analyzer will exceed 1Ghz(0.15~1050MHz) have the glancing or fine adjust center frequency with the 100KHz/grid~100MHz/grid span select, compose the simple frequency-domain. One 4 and 1/2 bit LED display can be selected for the center frequency and marking frequency reading. AT5011 have a tracking generator, this instrument can be used to the pre-research testing. can detect the mobile phone’s RF circuit’s native signal, intermediate frequency, radiation signal etc. the spectrum analyzer is used to examine and repaired that mobile phone can’t going the web, very conveniently and exactly. 

Frequency range: 0.15~1050MHz
4 and 1/2 digital displays. (Center frequency, 0.1MHz resolution)
-100~+13dBm amplitude range, 20MHz, 400MHz center frequency span and 4 KHz video filter.
 Tracking generator 
Output amplitude :+0~-50dBm(50Ω)
 Specifications:
 Frequency range: 0.15 to 1050MHz 
Center frequency display accuracy: ±100kHz
 Marker accuracy: 0.1% spans 100 kHz 
Resolution of frequency display: 100 kHz (4.5 digit LED)
 Frequency scans width accuracy: ±10% 
Frequency stability: better than 150 kHz/ hour 
IF Bandwidth (-3dB): 400 kHz and 20 kHz; 
Video-Filter (ON): 4 kHz
Sweep rate: 43Hz 
Amplitude range: -100dBm to +13dBm
 Screen display range: 80dB (10dB/div.) 
Reference level: -27dBm to +13dBm (in 10dB steps)
Reference level accuracy: ±2dB 
Average noise level: -90dBm (20 kHz Bandwidth)
Distortion: < -55dBc of 2nd and 3rd harmonic 
Third order intermod.: -70dBc (two signals > 3MHz apart)
Sensitivity: Better than -90dBm 
Log scale fidelity: ±2dB (without attn.) 500MHz 
Input attenuator: 0 to 40dB (4×10dB steps) 
Input attenuator accuracy: ±1dB/10dB
 Max. Input level: +10dBm, ±25V DC (0dB attn.) +20dBm (40dB attn.)
 Frequency scans width: 100 kHz/div. to 100MHz/div, in 1-2-5 steps and 0Hz/div. (Zero Scan)