Thông số chi tiết của máy phay thường:
Product Features
3 HP spindle motor, 16 speeds step pulley milling head
9” x 42” hardened and ground table
Table, saddle, and knee with hardened and ground dovetail ways
Precision ground leadscrews with backlash compensating double nut
Precision bored and ground milling head, with super precision ABEC-7 bearings
Meehanite® casting, with built in coolant reservoir in machine base
Centralized one-shot lubrication, with metered check-valves
Optional Accessories
Dro System
Table (X-Axis) Power Feed
Saddele (Y-Axis) Power Feed
Knee (Z-Axis) Power Feed
Air Power Drawbar
Flood Coolant System
Chip Tray
Right Angle Milling Attachment w/ Arbor Support
Rustlick Coolant (1 Gal., Mixes 1:30)
Riser Blocks (4″/6″/8″)
Angle-lock Vises (6″/8″)
Rotary Table
Clamping Kit (52pc)
R-8 Collet Set
Single Phase Motor Option
NMTB-30 Spindle
Specifications:
|
Table Size
|
9" x 42"
|
|
Table Travel (X-Axis)
|
28"
|
|
Saddle Travel (Y-Axis)
|
12"
|
|
Knee Travel (Z-Axis)
|
15"
|
|
Quill Travel
|
5"
|
|
Ram Travel
|
14.5"
|
|
Spindle Motor
|
3 HP
|
|
Spindle Speed
|
80–5440 RPM (16–Speeds)
|
|
Spindle Taper
|
R-8
|
|
Quill Diameter
|
3.375"
|
|
Quill Feed Rate
|
0.0015" / 0.003" / 0.006" in/rev
|
|
Drilling Capacity (Manual / Power)
|
0.75" / 0.37" diameter
|
|
Boring Capacity
|
6" diameter
|
|
Milling Capacity
|
2.0 in³/min
|
|
Maximum Work Load (Center)
|
750 lbs
|
|
Spindle Nose to Table Surface
|
33" - 18.25"
|
|
Spindle Center to Column
|
5" - 19.5"
|
|
Net Weight
|
2200 lbs
|
|
Gross Weight
|
2300 lbs
|
|
Shipping Dimensions
|
72" x 72" (skid)
|
|
Power Requirements
|
220 volts, 3 phase, 60 Hz, 10 Amp (optional 440v, requires 5 Amp)
|
